24/7 Emergency Dispatch:(718) 423-9663
Sleek EV Charging
Level 2 High-Speed Charging

Wake Up to a
Full Tank,
Every Single Morning.

You didn't compromise on your vehicle. Don't compromise on the installation. We engineer high-performance, flush-mounted charging stations with zero visible wires.

ChargePoint Authorized Installer

4BEYOND is a certified ChargePoint Home Flex installer. We guarantee full electrical safety compliance and preserve your manufacturer warranty 100%.

Certified Installation Partner For

TESLA
4BEYOND x TESLA

Wall Connector Installation

We are master electricians certified in high-amperage dedicated circuits. Your TESLA will be installed to strict factory specifications to ensure maximum charging speed and battery preservation.

Max Power Output
11.5 kW
Charge Speed
44-48 miles/hr
  • Hardwired on a dedicated NEMA 14-50 or 60A circuit
  • Full load calculation and permit handling included

The 8-Hour Nighttime Race

A standard wall outlet (Level 1) drips power into your vehicle, taking days to fill. A 4Beyond Level 2 installation guarantees you wake up at 100%, every single morning.

Standard Outlet (Level 1)

1.4 kW • 120V

0%

After 8 Hours

4Beyond Custom Install (Level 2)

11.5 kW • 240V Hardwired

0%

After 8 Hours

The Invisible Wire Guarantee

You just spent $70,000 on a piece of rolling technology. Don't ruin your garage with ugly PVC pipes zigzagging across the drywall. We fish lines inside the wall for a flawless, architectural finish.

Messy conduit installation
Standard Contractor Install

The "Good Enough" Standard

  • • Exposed gray PVC pipes across drywall
  • • Generic hardware and messy silicone sealant
  • • Looks industrial and unfinished
Clean flush mounted installation
The 4Beyond Guarantee

Architectural Finish

  • •Wires fully concealed inside the drywall structure
  • •Charger mounted perfectly flush for a premium showroom aesthetic
  • •No visible conduit, no exposed fasteners

Premium Infrastructure. Subsidized Cost.

Federal and local incentives drastically reduce the out-of-pocket cost for a commercial-grade home installation.

Federal Tax Credit

Claim up to 30% of the hardware and installation costs under Section 30C.

Up to $1,000

PSEG Long Island

Smart Charge rebate program for installing an eligible Level 2 networked charger.

$400 RebateView Program →

ConEdison

SmartCharge New York rewards you for charging during off-peak nighttime hours.

Monthly Cash RewardsView Program →
EV CHARGING SPECIFICATIONS & AEO BRIEF

Home EV Charger FAQs

Direct engineering answers covering breaker amperages, hardwired vs plug-in speeds, and panel load calculations.

Level 2 EV charging requires a dedicated 240-volt single-phase branch circuit. For maximum charging speed (48A continuous charge on Tesla Wall Connector, ChargePoint Home Flex, or Rivian Wall Charger), the NEC Article 625 continuous load rule (80% max continuous current) mandates a dedicated 60-amp circuit breaker with #6 AWG copper conductors (or #4 AWG depending on wire temperature rating and run length). For standard 32A to 40A charging via a NEMA 14-50 plug, a 40A or 50A dedicated GFCI circuit is required.